The Shure 515BSM is a low-impedance,
dynamic microphone designed for hand-held or fixed use. The
unidirectional (cardioid) pickup pattern provides excellent
reproduction of voice and effective rejection of feedback.
The Shure 515BSM microphones are supplied
with a push-to-talk switch and a four-conductor, retractable cable (2
shielded conductor).
The Shure 515BSM is especially suitable
for use in paging systems, public speaking, stage performance, and
public address systems. They are also highly recommended for other
applications requiring both hand-held and fixed installation
operations. The microphones are wired with the microphone circuit
normally open for use in parallel microphone installations.
Shure 515BSM Features
- Frequency response optimized for announcing, narration, and
paging applications
- Cardioid pickup pattern: symmetrical about axis
- Neodymium magnet for high signal-to-noise ratio
- Shock-mounted cartridge for quiet operation and low
stand/handling noise
- Tough diecast, locking grille and handle resist wear from
constant use and handling
- Built-in push-to-talk switch controls both microphone
- circuit and relay or control circuit
Shure 515BSM Specifications
- Type: Dynamic (moving coil)
- Frequency Response: 80 to 15,000 Hz
- Impedance: 150 Ω rated (180 Ω actual)
- Output Level (at 1,000 Hz): Open Circuit Voltage*:
–57.0 dBV/Pa (1 Pa=94 dB SPL) (0.14 mV)
- Switch: Built-in, leaf-type, non-locking, push-to-talk
- Shock Mount: Internal rubber vibration isolator
- Cable: Highly durable, retractable cable with effective hum
shielding, four conductors (two shielded), neoprene jacketed with 5-pin
connector
- Cable Length: 330 mm (13 in.) retracted, 1.83 m (6 ft)
extended
- Body: Silver coloured finish die casting with black enamel
diecast grille and stainless steel screen
- Certification: Conforms to European Union directives,
eligible to bear CE marking; meets European Union EMC Immunity
Requirements (EN 50 082–1, 1992).
- Connections: 5-Pin connector, Low Impedance, designed for
connection to microphone inputs rated at 75 to 300 ohms.
- Net Weight 515BSM: 380 g (13.5 oz)
Shure 515BSM Unidirectional Dynamic Paging Microphone (code 28958)
Especially suitable for use in paging systems, public speaking, stage performance, and public address systems.
£154.00 (inc vat)