Shure PGX24UK/BETA 87A Wireless Vocal System - Offers excellent sound for bands and presenters alike. It comprises a PGX2 handheld transmitter with a Beta 87A microphone head and PGX4 diversity Wireless “diversity” receivers feature two separate antennas for consistent signal reception.Read moreGo to the glossary receiver.
Simply press the channel button on the front of the receiver and it will perform a quick scan of the area and select a clear frequencyThis is how many times a sound or radio wave oscillates in one second. Once this is done, sync up the receiver with your transmitter by pressing the sync button on the receiver and pointing the infrared port on the transmitter at the receiver.
A maximum of 8 musicians can use PGX Wireless systems in parallel. One wireless system consists of one handheld transmitter and one receiver.
Shure PGX24UK/BETA 87A Main Features:
- 92m operating range
- Multi-color LED indicating power, lockout, mute and low battery
- The frequencyThis is how many times a sound or radio wave oscillates in one second.Read moreGo to the glossary Agile UHF design provides up to 90 selectable UHF frequencies that operate on an 18MHz UHF bandwidth
- More than eight hours of continuous use with two AA batteries
- Carrying case included in every system
- DiversityWireless “diversity” receivers feature two separate antennas for consistent signal reception.Read moreGo to the glossary Reception system uses twin receiver circuits to minimise noise and drop out caused by RF interference
- Use up to 8 systems simultaneousy
- PGX4 has has XLR and unbalanced 1/4 inch jack audio outputs
- PGX2 includes mute switch and battery power warning lights - 8 hours battery life from 2 x AA 1.5v alkaline batteries
Shure PGX4 Receiver Main Features:
- Dimensions:
40 mm H x 181 mm W x 104 mm D (1.6 x 7.125 x 4.1 in.)
- Weight:
327 g (11.5 oz.)
- Housing:
ABS
- Audio Output Level (ref. +/– 33 kHz deviation with 1 kHz tone)
- XLR connector (into 600 O load): –19 dBV
- 1/4 inch connector (into 3000 O load): –5 dBV
- Output Impedance: XLR connector: 200 O / 1/4 inch connector: 1kO
- XLR output (Impedance balanced): Pin 1: Ground (cable shield) / Pin 2: Audio / Pin 3: No Audio
- Sensitivity:
–105 dBm for 12 dB SINAD, typical
- Image Rejection:
>70 dB, typical
- Power Requirements:
12–18 Vdc at 150 mA, supplied by external power supply
Shure PGX24/BETA 87A Wireless Vocal System, T1, Channel 70 (code 79345)
Band T1 (846 - 865 MHz): Includes PGX4 Diversity Receiver, BETA 87A Microphone Head and PGX2 Handheld Transmitter [Bundle]
£431.71 (inc vat)