The Shure SLX24UK/SM86 Wireless Vocal System (Channel 38) includes the SLX4 receiver and SLX2 handheld transmitter with a SM86 microphone head.
The SLX4 receiver brings unprecedented ease of use to wireless with Automatic Frequency Selection and Automatic Transmitter Setup. With included rack hardware and detachable antennas, it is ready for immediate installation right out of the box.
The Shure SM86 is a unidirectional (cardioid) condenser vocal microphone for professional use in live performance. An extremely rugged microphone, the SM86 withstands the rigours of touring whilst delivering studio-quality sound. The
tailored frequency response of the SM86 reproduces vocals with clarity.
A cardioid pickup pattern isolates the main sound source while minimizing unwanted background noise. The built-in three-point shock mount minimizes handling noise, and a two-stage pop filter reduces wind and breath noise.
The SM86 is an excellent selection for use with both stage monitors and personal in-ear monitors. The SM86 with the SLX2 transmitter features the SM86 cardioid condenser microphone head which is tailored for smooth, warm and rich vocal reproduction.
Shure SLX24UK/SM86 Wireless Vocal System (Channel 38) Features:
- Band K3E (606 - 630 MHz)
- Unparalleled Ease of Set-Up
- Auto Frequency Selection locates a clear channel instantly
- Auto Transmitter Set-up automatically syncs the transmitter to the receiver via infrared
- With included accessories SLX is installation ready, out-of-the-box
- Exceptional Audio Quality - employs a level-dependant circuitry which dramatically improves audio quality by eliminating artifacts associated with traditional, fixed companding
- Microprocessor controlled Predictive Diversity
- Operating Range Under Typical Conditions: 100m (300 ft.) Note: actual range depends on RF signal absorption, reflection, and interference
- Audio Frequency Response (+/– 2 dB): Minimum: 45 Hz, Maximum: 15 kHz
- Total Harmonic Distortion (ref. +/– 38 kHz deviation, 1 kHz tone): 0.5%, typical
- Dynamic Range: >100 dB A-weighted
- SM86 Condenser cartridge for studio quality sound
- Tailored frequency response for a clear reproduction of vocals
- Rugged construction withstands the rigours of touring sound
- Cardioid polar pattern minimizes unwanted background noise
- Excellent choice for stage monitors and personal in-ear monitors
- Transducer Type: Condenser (electret bias)
- Frequency Response: 50 to 18,000 Hz
- Output Impedance: 150 Ohms at 1 kHz, Recommended minimum load impedance: 600 Ohms
- Sensitivity (at 1,000 Hz) Open Circuit Voltage: –50 dBV/Pa (3.15 mV) (1 Pa = 94 dB SPL)
- Output Clipping Level, 1000 Ohm Load at 1,000 Hz: +3 dBV (1.41 V)
- Maximum SPL (at 1,000 Hz), 1000 Ohm load (1% THD): 147 dB
- Self-Noise: 23 dB typical, A-weighted
- Dynamic Range (1000 Ohms): 124 dB (maximum SPL to A-weighted noise level)
- Signal-to-Noise Ratio: 71 dB at 94 dB SPL (IEC 651)
- Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of the output connector
Shure SLX24/SM86 Wireless Vocal System, K3E, Channel 38 (code 80318)
Band K3E (606 - 630 MHz): Includes SLX4 Diversity Receiver and SLX2 Handheld Transmitter with SM86 Microphone Head [Bundle]
£632.84 (inc vat)