Dynacord D 12 D-Lite CL 1200 Exclusive Offer!
Buy a pair of Dynacord D D-Lite passive 2-way full-range speakers and get a Dynacord CL 1200 stereo power amp worth £1000 absolutely FREE! OFFER EXTENDED!
DYNACORD fulfills a longtime customer demand for a light-weight, extremely robust high performance professional 12" 2-way speaker cabinet for use in professional, portable and fixed install sound reinforcement applications. The cabinet is manufactured from Polypropylene and therefore is extremely resistant against abuse on the road.
For low frequencies, an Electro-Voice DL12BFH is used. The recently developed Electro-Voice ND2 Neodymium driver is used for the projection of mid and high frequencies. Power handling of the cabinet is 300W (continuous) and 1200W peak. Maximum sound pressure level is 129dB, the frequency range of the D12 is 70Hz to 18kHz. The D12 is ideally suited for applications as a full-range cabinet or as mid-hi cabinet in ina larger system.
Features:
- Cabinet: Full-Range
- Configuration: Passive 2-Way
- Nominal Impendance: 8 Ohms
- Rated power RMS: 300W
- Program power: 600W
- Peak power: 1200W
- SPL 2,83V / 1m (1W/8 Ohms) 98 dB
- Max. SPL 1m (calc. with peak) 129 dB
Dynacord CL 1200 Stereo Power Amplifier
The new Compact Linear Precision Series power amplifiers combine outstanding audio performance with maximum reliability and operating security as well as being markedly lighter than equivalent power amplifiers.
Through the use of an optimized power supply with low dispersion toroidal transformers as well as of Class H technology (CL 800 Class AB), a large amount of headroom above the specified nominal output has been achieved along with a considerable reduction in weight and thermal leakage.
Dynacord CL Series power amplifiers satisfy all the criteria for punishing on the road use. They are reliably protected against overheating, overload and short-circuits as well as high frequency and DC at the output. The soft start function employs relays to insert a delay between switching on the device and the activation of the power outputs. A further circuit limits the current on power-up, there-by protecting the mains fuses. DYNACORD amplifiers constantly monitor the input versus the output signal by means of super-fast audio processors which send, in case of non-linear operation, control parameters to the limiters. The limiters are thus operating dynamically and do not affect the amplifiers dynamic capabilities as they control the input gain level. Thermal stability is provided by a 3-stage fan with a very low noise level.
The inputs are electronically balanced and implemented on XLR connectors, whilst direct outs for looping the signal are also standard. Input routing permits the choice between Mono and Stereo modes. Mono bridged mode is also easy to realize thanks to the separate Bridged Out connectors and the Bridged Mode switch.
- Rated Output Power: 4 Ohm - 500W, 8 Ohm - 250W
The Dynacord D 12 D-Lite CL 1200 EXTENDED OFFER is available from Digital Village online, in-store or via telephone mail-order. Contact any DV store for Dynacord D 12 D-Lite