The Alto APX3000 PA Power Amplifier brings up to four channels of dependable, continuous, clean power to any live performance.
The APX3000 can be configured to deliver 4 x 550 watts at 4 ohms, 4 x 350 watts at 8 ohms or in bridged mode, where the APX3000 pumps out 2 x 1500 watts of power.
Because it is class D, APX3000 gives you all the purity reliability of a professional amp without breaking your back just to lift it. Weighing in at only 17.6 lbs., the APX3000 goes into venues with amazing ease and convenience whether used in a permanent installation or portable application.
Balanced, combo 1/4” XLR inputs, "Touch-proof" binding posts and speak-on jacks make connecting the APX3000 a snap at any gig, so you never lose precious time getting things going. Once installed, the APX3000's level and clip indicators are designed to keep you informed of performance levels at a glance.
The APX3000 amplifier supplies massive power with plenty of headroom to drive any passive speaker. The APX3000 also contains low-noise cooling fans to prevent overheating and high-current toroidal transformers for the lowest possible noise floor.
Alto APX3000 features include:
- Continuous 4 x 550 Watt power at 4O; 4 x 350W at 8 O; 2x1500W at 8O Bridged
- Switching Class D power, low-pass filter and balanced combo input jacks
- Low pass filter
- Easy-to-see LED monitoring
- FREQUENCY RESPONSE: (at 10dB below rated output power) 20 Hz~25 KHz (+0/-3 dB)
- VOLTAGE GAIN: 32 dB
- DISTORTION: (SMPTE-1M) <0.5%
- S/N ratio: >110 dB
Alto APX3000 PA Power Amplifier (code 83417)
Continuous 4x550 Watt power at 4-ohms; 4x350W at 8-ohms; 2x1500W at 8-ohms Bridged, switching Class D power, low-pass filter and balanced input jacks, low pass filter and easy-to-see LED monitoring
£TBA (inc vat)