The Crown 1160A Commercial Audio Series Power Amplifier. Crown Commercial Audio Series, 1 input and one 160W power amplifier for single-zone systems.
The Crown 1160A high-value amplifier for commercial and industrial audio. The 1160A has 1 input and one 160W power amplifier for single-zone systems. This amp is part of Crown’s Commercial Audio Series, which also includes mixers and mixer-amps. These low-cost units provide all necessary features in a simple building-block format. The sound system can be upgraded as a facility expands. For example, you can add more mixers for more inputs, or add more power amps (or mixer-amps) to handle more zones. Some applications include schools, hospitals, factories, restaurant/retail, houses of worship, fitness facilities, A/V boardrooms, prisons, and small offices. Typical uses are paging, background music, security and evacuation instructions.
The main features of the Crown 1160A include:
- 1160A has 1 input and one 160W power amplifier for single-zone systems
- Ideal for commercial and industrial use
- Balanced Phoenix-type line inputs; touch-proofed screw-terminal speaker outputs
- Advanced protection system includes output current limiting, DC protection, circuit breaker/fuse, and thermal protection
- Engineer Specs: Minimum guaranteed power into 4 ohms or 70V/100V output: 160W maximum power at 1 kHz with 0.5% THD. Frequency Reponse (at 1 watt from
4-ohm tap): 70 Hz - 19 kHz +/– 1 dB. Frequency Response (at line out): 20
Hz to 20 kHz +/–1 dB. Power Bandwidth (at 4-ohm tap, 2 dB below maxium
1 kHz power): 50 Hz to 20 kHz with < 0.5% THD. Signal to Noise Ratio (ref.
to rated power, master volume at minimum): 85 dB. DC Output Offset:
< ±5 mV. THD: Less than 0.5% at rated power at 1 kHz. Input Sensitivity
(for full output at maximum gain): 800 mV. Input Impedance (nominal):
100 kilohms. Minimum Load Impedance: 100V output 160 ohms, 70V
output 80 ohms, 4-ohm output 4/8 ohms. Crosstalk: –70dB at 1kHz. Line
Output Level (nominal): 1V into 10 kilohms. AC Line Voltages Available:
100V 50/60 Hz, 120V 60 Hz, 220V 50/60 Hz, 230V 50/60 Hz, 240V
50/60 Hz. Operating Temperature/Humidity: 0 degrees C to 40 degrees
C at 95% relative humidity (non-condensing). Storage Temperature: –20
degrees C to 85 degrees C.
- Included accessories: power cord, detachable rack ears, screws
for rack ears, non-touch cover for output connectors, Phoenix-type connectors,
and spade lugs
- Optional accessories: 1-VCAP remote volume control for one channel, and a 4-VCAP remote volume control for four channels
- Three-Year, No-Fault, Fully Transferable Warranty completely protects your investment and guarantees its specifications
Crown 1160A Commercial Audio Series Power Amplifier (code 51613)
Low-cost unit providse all necessary features in a simple building-block format. Add more power amps to handle more zones. 1 input and one 160W power amplifier for single-zone systems.
£477.60 (inc vat)