Search our site

Basket (0) £0.00

view site map

Crown XLS 5000 2-Channel Power Amplifier

Crown XLS 5000 2-Channel Power Amplifier

Crown XLS 5000 2-Channel Power Amplifier

XLS 5000 2-Channel Power Amplifier description:

The Crown XLS 5000 2-Channel Power Amplifier is housed in a rugged, all-steel 3U chassis.

The Crown XLS 5000 features electronically balanced XLR inputs; touchproof binding post and Speakon® outputs. Also precision detented level controls, power switch, power LED, and six LEDs which indicate signal, clip and fault for each channel.

The Crown XLS 5000 2-Channel Power Amplifier Main Features Include:

  • Reliable design incorporates many popular features
  • Housed in a rugged, all-steel 3U chassis
  • Efficient forced-air fans prevent excessive thermal buildup
  • Electronically balanced XLR inputs; touchproof binding post and Speakon® outputs
  • Precision detented level controls, power switch, power LED, and six LEDs which indicate signal, clip and fault for each channel.
  • Stereo, 2 ohms (per ch.): 2,500W with 1% THD
  • Stereo, 4 ohms (per ch.): 1,800W with 0.1% THD
  • Stereo, 8 ohms (per ch.): 1,100W with 0.1% THD
  • Bridge-Mono, 8 ohms: 3,600W with 0.1% THD
  • Bridge-Mono, 4 ohms: 5,000W with 1% THD
  • Sensitivity (volts RMS) for full rated power at 4 ohms: 1.25
  • Frequency Response (at 1 watt, 22 Hz - 20 kHz): +0 dB, –1 dB
  • Signal to Noise Ratio below rated power (20 Hz to 20 kHz, inputs terminated) - A-weighted, below rated power: > 100 dB
  • Signal to Noise Ratio below rated power (20 Hz to 20 kHz, inputs terminated) - No weighting, below rated power: > 95 dB
  • Total Harmonic Distortion (THD) at 1 full bandwidth power, from 20 Hz to 1 kHz: < 0.5%
  • Intermodulation Distortion (IMD) 60 Hz and 7 kHz at 4:1, from full rated output to –30 dB: < 0.3%
  • Damping Factor (8 ohm): 10 Hz to 400 Hz: > 200
  • Crosstalk (below rated power) at 1 kHz: -75 dB
  • Crosstalk (below rated power) at 20 kHz: –50 dB
  • Input Impedance (nominal) (balanced, unbalanced): 20 kilohms, 10 kilohms
  • Load impedance Stereo: 4-8 ohms
  • Load impedance Bridge mono: 8 ohms
  • Ventilation: Flow-through ventilation from front to back
  • Cooling: Internal heat sinks with forced-air cooling
  • Dimensions (Width, Height, Depth): EIA Standard 19"W (EIA RS-310-B), 5.25” ( 13.3 cm) H x 15.5” (39.5 cm) D.
  • Net Weight: 62.0 lb (27.7 kg)

Crown XLS 5000 2-Channel Power Amplifier (code 68189)
2-Channel Power Amplifier
£990.00 (inc vat)

Manufacturer: Crown

This page first created on: 15/10/2009

Sorry but this product is now discontinued and is no longer available to purchase.

Other related items are available.

Or why not check out our clearance section for this product?