Crown XTi 1000 Stereo Power Amplifier

XTi 1000 Stereo Power Amplifier description:

The Crown XTI 1000 Amplifier. Powerful, reliable performance, rugged and lightweight for portable PA applications.

The Crown XTI 1000 is a part of the XTi Series of Crown amplifiers, professional tools designed and built for portable PA applications. The series includes three models which are identical except for output power: XTi 1000, 2000 and 4000. All are rugged and lightweight, and offer unmatched value in their class. XTi-Series amplifiers feature an LCD screen with speaker presets for crossover frequencies, EQ, limiting, delay, and a subharmonic synthesizer. Other features include a switchmode universal power supply, useful function indicators, proportional-speed fan-assisted cooling, XLR inputs, Speakon and binding-post outputs, short-circuit protection and more. With their powerful, reliable performance, XTi-Series amps easily handle 2-ohm loads and are capable of chest-thumping lows.

The main features of the Crown XTI 1000 include:

• Integrated speaker presets with LCD front panel display
• Accurate, uncoloured sound with very low distortion for the best in music and voice reproduction
• Advanced protection circuitry guards against: shorted outputs, open circuits, DC, mismatched loads, general overheating, high-frequency overloads and internal faults
• Extremely versatile, handling a wide range of speaker impedances and outputs
• Switch-mode universal power supply
• Speaker presets for crossover frequencies, EQ, limiting, and delay
• Fits in 2U of rack space and weighs under 19 pounds; weight sets a new standard in lightweight amps
• Speakon and binding post outputs, XLR inputs and loop-thrus
• Comprehensive LED status per channel
• Output Power (1 kHz Power): 2 ohm Stereo (per channel)700W, 4 ohm Stereo (per channel) 500W, 8 ohm Stereo (per channel) 275W, 4 ohm Bridge-Mono 1400W 8 ohm Bridge-Mono 1000W
• Voltage Gain at 1kHz, 8 ohm rated output: XTi 1000: 30.5 dB, XTi 2000: 32.9 dB, XTi 4000: 34.2 dB
• Frequency Response: +0/–1 dB from 20 Hz to 20 kHz at 1 watt into 4 ohms
• Load Impedance: Safe with all types of loads
• Rated for 2 to 8 ohms in Stereo mode, 4 to 16 ohms in Bridge-Mono mode
• Sensitivity: 1.4V
• Signal to Noise Ratio: 100 dB (A weighted)
• Damping Factor: Better than 500 from 20 Hz to 400 Hz
• Crosstalk: > 70 dB below rated power, 20 Hz to 1 kHz
• Input Stage: Input is electronically balanced and employs precision 1% resistors
• Input Impedance (nominal): 20 k ohms, balanced; 10 k ohms, unbalanced
• Maximum Input Signal: +22 dBu typical
• AC Line Voltage and Frequency Configurations Available: 100V, 120V, 220-240V 50/60 Hz
• AC Line Current: XTi 1000 6.5A, XTi 2000 6.9A, XTi 4000 8.0A
• At Idle: Draws no more than 90 watts
• Operating Temperature: 0° C to 40° C at 95% relative humidity (non-condensing)