Crown XTi 6000 Stereo Power Amplifier

XTi 6000 Stereo Power Amplifier description:

The Crown XTI 6000 Stereo Power Amplifier features an integrated DSP that allows you to quickly and easily configure crossovers, EQ, limiting and delay, along with tools like a pink noise generator, subharmonic synthesizer, and universal tracking switch-mode power supply, which reduces power draw and waste heat.

The Crown XTI 6000 use Icepak™ thermal modeling software to make the XTi 6000 more energy efficient and lightweight.

The Crown XTI 6000 Stereo Power Amplifier Main Features Include:

• Reliable design incorporates many popular features
• Housed in a rugged, all-steel chassis
• Integrated DSP
• Icepak™ thermal modeling software
• Stereo, 2 ohms (per ch.): 3,000W with 1% THD
• Stereo, 4 ohms (per ch.): 2,100W
• Stereo, 8 ohms (per ch.): 1,200W
• Bridge-Mono, 8 ohms: 6,000W with 1% THD
• Bridge-Mono, 4 ohms: 4,200W
• Sensitivity (volts RMS) for full rated power at 4 ohms: 1.4V
• Frequency Response (at 1 watt, 22 Hz - 20 kHz): +0 dB, –1 dB
• Signal to Noise Ratio (below rated 1 kHz power at 8 ohms), A-weighted: 103 dB
• Damping Factor (8 ohm): 20 Hz to 400 Hz: > 500
• Input Stage: Input is electronically balanced and employs precision 1% resistors.
• AC Line Current (120VAC amplifier playing 1/8 power pink noise into 4 ohms per ch): 15.3A; at idle draws no more than 180 watts
• Crosstalk (below rated power) 20 Hz to 1 kHz: > 70 dB
• Input Impedance (nominal): 20 kilohms balanced, 10 kilohms unbalanced
• Load impedance Stereo: 2-8 ohms
• Load impedance Bridge mono: 4-16 ohms
• Voltage Gain (at 1 kHz, 8 ohm rated output): 37.1 dB
• Maximum Input Signal: +22 dBu typical
• Ventilation: Flow-through ventilation from front to back
• Cooling: Heat sinks and proportional-speed fan
• Dimensions (Width, Height, Depth): EIA Standard 19 in. W (EIA RS-310-B) x 3.5 in. (8.9 cm) H x 16.2 in. (41.15 cm) D
• Net Weight: 24.0 lb (10.9 kg)