The Dynacord Powermate PA Package C includes a Powermate PM 1000 and a pair of D-Lite D 12 PA Speakers.
The PowerMate has long been regarded as the epitome of a powered mixer, offering uncompromised professional quality in every department: professional components, professional features, professional reliability. The Powermate range is one of the biggest selling powered mixers. The PowerMate has won numerous awards and comes out on top in countless comparative tests. But aside from its quality, it’s the fact that it matches perfectly the needs of its users that makes the PowerMate the outstanding solution for a wide range of professional sound reinforcement applications. Now, after six extraordinarily successful years, the PowerMate has undergone a metamorphosis from which it emerges, more powerful, more fully-featured, and more elegant than ever before: the Power and the Beauty.
Features:
- Maximum Midband Output Power, 1 kHz, THD=1%, Dual Channel into 4 Ohms 2 x 700 W, into 8 Ohms 2 x 430 W
- Maximum Midband Output Power, 1 kHz, THD=1%, Single Channel into 4 Ohms 2 x 870 W, into 8 Ohms 2 x 500 W
- Rated Output Power, THD=0.1%, Single Channel into 4 Ohms 2 x 700 W, into 8 Ohms 2 x 350 W
- Maximum Output Voltage of power amplifier, no load 70 Vrms
- THD at 1kHz, MBW=80kHz
- MIC input to Main L/R output, +16 dBu, typical < 0.005%
- Power amplifier input to Speaker L/R output < 0.01%
- DIM 30, power amplifier < 0.01%
- IMD-SMPTE, power amplifier, 60Hz, 7 kHz < 0.01%
- Frequency Response -3dB ref. 1kHz Any input to any Mixer output 15Hz ... 80kHz, Any input to Speaker L/R output 20Hz ... 70kHz
- Crosstalk, 1kHz Fader and AUX-Send attenuation > 85 dB, Channel to channel > 80 dB, CMRR, MIC input, 1kHz > 80 dB
- Input Sensitivity, all level controls in max. position, MIC input -74 dBu (155 ÌV), LINE Input (Mono) -54 dBu (1.55 mV)
- LINE Input (Stereo) -34 dBu (15.5 mV)
- Power Amplifier Input +6 dBu (1.55 V)
- Maximum Level, mixing desk
- MIC inputs + 21 dBu
- Mono Line inputs + 41 dBu
- Stereo Line inputs + 30 dBu
- All other inputs + 22 dBu
- Record Send output + 14 dBu
- All other outputs + 22 dBu
- Signal/Noise-Ratio, power amplifier, A-weighted 105 dB
- Equalization LO Shelving ± 15 dB / 60 Hz
- MID Peaking, mono inputs ± 15 dB /
- 100 Hz .. .8 kHz
- MID Peaking, stereo inputs ± 12 dB / 2.4 kHz
- HI Shelving ± 15 dB / 12 kHz
- Master EQ, 2x7-band, 63, 125, 400, 1k, 2k5, 6k, 12k Hz ± 10 dB / Q=2.0
- Power Consumption at 1/8 maximum output power, 4? 640 W
- Dimensions, (W xHx D), mm
PM1000 514.5 x 210.3 x 478.7
PM1600 673.5 x 210.3 x 478.7
- Weight without lid : PM1000 20 kg / 21 kg
- Weight including lid : PM1600 23.5 kg / 25 kg
The Dynacord D12 is a light-weight, extremely robust, high-performance professional 12“ 2-way plastic cabinet for use in professional, portable and fixed install sound reinforcement applications.
The Dynacord D12 is ideally suited to be used in demanding fixed installations. The cabinet is manufactured from Polypropylene and therefore is extremely resistant against abuse on the road.
For low frequencies the Dynacord D12 uses an Electro-Voice DL12BFH speaker. The recently developed Electro-Voice ND2 Neodymium driver is used for the projection of mid and high frequencies. The Constant- Direcctivity HF horn has been integrated into the baffle by CAD methods.
Nominal coverage angle of the Dynacord D12 cabinet is 80 degrees by 40 degrees, horizontal / vertical respectively. Power handling of the cabinet is 300W (continuous) and 1200W peak. Maximum sound pressure level is 129dB, the frequency range of the D12 is 70Hz to 18kHz. The D12 is ideally suited for applications as full-range cabinet or as Mid-Hi cabinet in in highperformance small-format active and passive satellite systems.
Dynacord D12 main features include:
- 300W passive PA Speaker
- Impedance 8 Ohms
- Rated power RMS300 W
- Program power 600 W
- Peak power 1200 W
- SPL 1m (calculated with peak power)129 dB
- Frequency range ( -10dB )70 Hz - 18 kHz
- LF Transducer DL12BFH
- HF Transducer ND2S-8 (1" Exit)
- Voice Coil tracking protection
- Connector model: Speakon 2x NL4 MPR
- Connector wiring 4-pole
- Dimensions (WxHxD) 429.5 x 586 x 320.5
- Shipping weight: 17 kg
Dynacord Powermate PA Package C (code 58968)
Includes Powermate PM 1000 And A Pair Of D-Lite D 12 PA Speakers.[UXB]
£2,299.44 (inc vat)