The JBL C29AV-1 Contractor Series Installation Speaker, Black. JBL Professional Series Premium Indoor/Outdoor Monitor Speaker.
The JBL C29AV-1 provides improved
voicing for extremely flat, high fidelity
performance, extended bandwidth and
well-controlled defined coverage from a
compact loudspeaker. The rotatable high-frequency horn
allows use of the speaker in either vertical
or horizontal orientation. Consistent
coverage ensures excellent sound
character throughout the listening area.
Moderate magnetic shielding allows use
of the speaker as close as 230 mm (9 inches) to
video monitors.
The top-quality line distribution
transformer, designed for minimal insertion
loss and reduced saturation, allows
use of either 70V or 100V distributed
speaker lines. In bypass position, the 8 Ohms
impedance allows use of multiple speakers
on a loudspeaker line.
The included InvisiBall mounting
method is simple to install, aims easily and
provides a high degree of theft deterrence.
InvisiBall allows horizontal rotation of up
to 41° off-axis and vertical rotation of up
to 36° (horn end inward) or 23° (woofer
end inward). Attachment points for the
optional MTC-29UB U-bracket allows for
compact installation.
With the Control 29AV-1 weather resistance has been maximized.
The woofer’s cone is made of kevlar,
surround is pure butyl rubber, and the
driver basket is rear loaded to minimize
direct exposure. The compression driver’s
diaphragm is pure titanium. The grille is
thermoset composite coated and comes
with foam to minimize incursion of water.
Nickel/zinc rust-resistant terminals ensure
a secure input connection. An MTC-PC2
sealed-entrance cover is included to
further protect the speaker’s terminals.
JBL’s exclusive SonicGuard overload
protection is virtually inaudible to the
listener, ensuring reliability while
providing full fidelity sound.
Available in this black version or as white (C29AV-WH-1). The
cabinet will accept a variety of paints to
match any décor.
The main features of the JBL C29AV-1 include:
- JBL Professional Series Premium Indoor/Outdoor
Monitor Speaker
- Extremely smooth, flat frequency
response with extended bandwidth
- 110° x 85° HF coverage, rotatable horn
- 110 Watt transformer for 70V or 100V
lines, with 8 Ohms thru
- SonicGuard overload protection
- 200 mm (8 inch) Kevlar cone woofer, 25 mm (1 inch) titanium diaphragm
compression driver
- Includes InvisiBall mounting hardware,
plus ten 6 mm attachment points for
suspension and optional U-bracket
- Sealed input panel cover and screwdown
input terminals
- Frequency Range (-10 dB): 37 Hz – 18 kHz
- Frequency Response (±3 dB): 43 Hz – 15 kHz
- 100 Hr Power Capacity: 300 Watts Continuous Program Power, 150 Watts Continuous Pink Noise
- Maximum SPL @ 1m - Short-Term: 118 dB; Long-Term: 112 dB
- Nominal Sensitivity: 90 dB, 1W @ 1 m (3.3 ft)
- Nominal Coverage Angle: 110° H x 85° V, rotatable
- Directivity Factor (Q): 6.7, averaged 500 Hz to 16 kHz
- Directivity Index (DI): 8.3 dB, averaged 500 Hz to 16 kHz
- Nominal Impedance: 8 ohms
- Minimum Impedance: 6.3 ohms @ 230 Hz 3.3 ohms @ 4.1 kHz
- Crossover Type: 3rd order High Pass, 2nd order Low Pass with
impedance compensation, 2.5 kHz crossover
frequency
- Transformer Taps: 70V: 110W, 55W, 28W & 14W
100V: 110W, 55W, & 28W
Thru Position: 8 Ohms nominal
- Enclosure Material: High impact polystyrene
- Grille: Thermoset composite coated steel
- Overload Protection: Full-range power limiting to protect network and
transducers. Serviceable internal fuse to protect
during extreme overload conditions.
- Environmental: IEC 529 IP-X4 splashproof rating. Exceeds MilSpec
810 for humidity, salt spray, temperature & UV. Passes Mil-Std-202F for salt spray.
- Termination: Screw-down terminal strip, zinc plated copper
base, nickel plated metal screws/washers. Accepts
up to 9 mm outside 4 mm inside open lug (#6, #8
or #10 lug), plus bare wire (up to 12 AWG/2.5 mm2).
- Safety Agency Rating: Transformer is listed per UL1876
- Dimensions (H x W x D): 520 x 306 x 277 mm (20.5 x 12.0 x 10.9 in)
- Net Weight (ea): 12.2 kg (26.8 lbs)
- Shipping Weight (ea): 14.0 kg (30.8 lbs)
- Included Accessories: 1 pc MTC-PC2 input panel cover, InvisiBall
mounting base, 6 mm x 260 mm InvisiBall Hex wrench.
- Optional Accessories: MTC-29CM to install speaker down from the ceiling
MTC-29UB U-bracket
JBL C29AV-1 Contractor Series Installation Speaker (code 51614)
150w 8 inch 2-way High Fidelity High Output System. 110 x 85 degree coverage with rotatable horn.
£388.03 (inc vat)