This exclusive bundle features the popular Mackie C300z Passive PA Speakers, Mackie PPM608 Powered Mixer, Speaker Stands and Speakon Cables - a great value Mackie powered PA system.
The Mackie C300z 2-Way Portable Passive Loudspeaker puts the superior clarity, wide dispersion, and legendary ergonomics of the SRM Series within reach of any serious musician, DJ, or small club.
The compact-yet-loud Mackie C300z speaker can be pole-mounted for use as a small full-range PA system, combined with subwoofers as needed, and even employed as high-quality passive floor monitors.
The Mackie PPM608 Professional Powered Mixer is ultra-light and completely self-contained with two ridiculously robust power amps for mains and/or monitors (500W + 500W). With 1000 watts of system power, this mixer provides more raw power than the competition.
Mackie custom designed the PPM608 with Class-D amps, which run cool and boast maximum efficiency to keep your sound pumping until they start kicking people out. Plus Mackie’s proven Fast Recovery circuitry, eliminates the risk of pesky amp latching. The result is a distortion free mix even when pushing peak levels.
The PPM608 's built-in limiter can go toe-to-toe with the most popular outboard stereo limiters used in live sound today, protecting your speakers from damage. The limiter’s attack and release times are specifically selected to address full-bandwidth music and will not muddy things up by adding any unwanted pumping. PPM mixers are surprisingly lightweight, but tremendously powerful. You can push the PPM608 to its maximum output, distortion free!
Mackie C300z Features:
- A single, Portable Precision Passive loudspeaker with 1.75" HF compression driver and 12" LF transducer
- HF compression driver mounted on a multi-celled aperture, with a constant directivity horn for room-wide 90° x 45° dispersion
- Precise reproduction of critical upper mid-range and high frequencies
- Tough, impact-resistant enclosure with sturdy handles, pole-mount, and integrated rigging points
- Designed for optimum performance with Mackie powered mixers and power amplifiers
- 750W peak power handling
- Three setup configurations: pole mount, flyable and wedge
- Passive version of the best-selling SRM450
- Height: 26 in/660 mm
- Width: 15.4 in/390 mm
- Depth: 14.8 in/376 mm
- Weight: 43 lbs/19.5 kg
The Mackie PPM608 Features:
- Full-featured 8-channel, 1000W, ultra-light Professional Powered Mixer with onboard 32-bit digital RMFX+ processor
- 500W + 500W Mackie designed Class-D, Fast Recovery power amplifiers
- 32-bit RMFX+ processor featuring 24 “Gig Ready” reverbs, choruses, and tap delay for live applications
- 8 premium Mackie mic preamps with 48V phantom power and TRS inserts (ch 1-6)
- Dedicated In-line Compression provides increased presence and punch for vocals and instruments
- 2 stereo inputs with dual RCA and dual 1/4-inch line inputs for flexible connectivity
- Mackie's 3-band active channel EQ (80hz, 2.5kHz, 12kHz)
- 2 built-in DI boxes for direct instrument connections
- Separate Monitor and FX auxiliary sends
- Dual 7-Band graphic EQ on the Mains and Monitor outputs for tuning rooms and monitor mixes
- 3-Mode Amplifier for ultra-flexible routing, switchable as Mains Stereo L/R, Mono Mains/Monitor 1, or Mon 1 & Mon 2
- Precision Passive EQ for enhanced clarity and LF response with Mackie passive loudspeakers
- Rugged metal handles built into the sides of the mixer case for easy transport from gig to gig
- Built like a tank and armoured in poly carbonate ABS, the PPM608 features classic Mackie rounded front chassis design. So if the PPM rolls on its face during transport the controls are recessed and protected
- Ultra-Lightweight and portable (20lbs/ 9kg)
- Ideal paired with Mackie C series (C300/200) or S series (S200) speakers
Mackie Powered PA System Package (code 79399)
Includes PPM608 Powered Mixer, C300z Speakers, Stands & Cables [UXB]
£729.00 (inc vat)