Mackie PPM1012 Powered Mixer

The Mackie PPM1012 Powered Mixer, 2 x 800w 8 channel ultra-light professional desktop powered mixer. Power to the desktop!

The Mackie PPM1012 Professional Powered Mixer is ultra-light and rack-mountable with two ridiculously robust power amps for mains and/or monitors (800W + 800W). With 1600 watts of system power, the PPM1012 is in a class of its own, fully capable of powering a huge system (try a couple of S215s AND a pair of C300s!). Mackie custom designed the PPM1012 with Class-D amps, which run cool and boast maximum efficiency to keep your sound pumping until they start kicking people out. Plus Mackie’s proven Fast Recovery circuitry, eliminates the risk of pesky amp latching. The result is a distortion free mix even when pushing peak levels. The PPM 1012 's built-in limiter can go toe-to-toe with the most popular outboard stereo limiters used in live sound today, protecting your speakers from damage. The limiter’s attack and release times are specifically selected to address full-bandwidth music and will not muddy things up by adding any unwanted pumping. PPM mixers are surprisingly lightweight, but tremendously powerful. You can push the PPM1012 to its maximum output, distortion free!

The main features of the Mackie PPM1012 include:

• Power to the desktop!
• Full-featured 12-channel, 1600W, Powered Desktop Mixer with 4-segment LEDs and solo PFL on every channel
• 800W + 800W Mackie designed Class-D, Fast Recovery power amplifiers
• 32-bit RMFX+ processor featuring 24 “Gig Ready” reverbs, choruses, and tap delay for live applications
• 8 mic/line mono inputs and 2 stereo line inputs for flexible connectivity
• Mackie high-headroom, low-noise mic preamps with RF rejection for pristine signal
• Dedicated In-line Compression provides increased presence and punch for vocals and instruments
• 2 stereo inputs with dual RCA and dual 1/4-inch line inputs for flexible connectivity
• Mackie's 3-Band Active channel EQ with a Mid sweep (100Hz-8kHz) on mono channels and 4-band active EQ on stereo line channels 7 and 8
• 2 built-in DI boxes for direct instrument connections on channels 7 and 8
• 4 Aux sends—2 FX & 2 Mon
• Dual 9-Band graphic EQ on the Mains and Monitor outputs for tuning rooms and monitor mixes
• Mono output with level control & low pass filter selectable from 75Hz-100Hz
• 3-Mode Amplifier for ultra-flexible routing, switchable as Mains Stereo L/R, Mono Mains/Monitor 1, or Mon 1 and Mon 2
• Precision Passive EQ for enhanced clarity and LF response with Mackie passive loudspeakers
• 48v Phantom power available for all mic inputs
• Headphone output with level control
• 12v BNC lamp Jack
• Built-like-a-tank metal chassis with a handle built into the front of the mixer for easy transport
• Rack ears included
• Lightweight and portable (29lbs/ 13kg)
• Ideal paired with two Mackie S215s (Main) AND a pair of C300s (Stage monitors)

MPN: 0026941-01

Manufacturer: Mackie

This page first created on: 14/03/2008

PPM1012 Powered Mixer related links:

• View all products by Mackie
• View all PA Systems & Live Sound
• View all PA Power Amplifiers
• View all Mixers
• View all Powered Mixers
• View all PA Systems & Live Sound
• View all Amplifiers
• View all Mixers