The Adam P11A is a two-way shielded active monitor that produces unique imaging and outstanding transient response at an attractive price point. The P11A was primarily designed for small to mid-sized project studios; however, it can also be used comfortably in any application where a small powered monitor is called for, from broadcast/post applications to surround monitoring. The V.M.T. tweeter is the same in all Adam monitors, starting with the P11-A and ending with the S7-A Main Monitors. You get the same superior resolution above 2 kHz from these monitors that sets all Adam loudspeakers apart from their competitors and by applying moderate equalization to the low end nearly an additional octave in bass response is achieved compared with a passive system. The P-11A woofer and tweeter are powered by separate 150W RMS amplifiers and are actively crossed over at 1.8 kHz. The system's frequency-response has highs extending all the way to 35 kHz and lows down to 48 Hz (±3 dB). Tweeter gain can be adjusted 4 dB up or down with a pot on the rear panel. Also found on the back are contour controls (±6 dB) for high- and low-shelf filters at 6 kHz and 150 Hz, respectively. The balanced analog input is on a balanced XLR connector.
Adam P11A Active Nearfield Monitor (code 10411)
Designed for for small to mid-sized project studios, broadcast/post applications to surround monitoring, with a V.M.T. tweeter delivering exceptional high frequency response.
£529.49 (inc vat)