The Adam P22A monitor is a two-way shielded active near/midfield monitor designed for applications where deeper bass and louder volumes are needed. Featuring superb imaging as a result of ADAM’s proprietary A.R.T. (Accelerated Ribbon Technology) folded ribbon tweeter, the P22A is ideally suited for project studios as well as professional recording and broadcast facilities. The tweeter is the same in all Adam monitors, starting with the P11-A near field monitor and ending with the S7-A Main Monitors. You get the same superior resolution above 2 kHz from these monitors that sets all Adam loud speakers apart from their competitors and by applying moderate equalization to the low end nearly an additional octave in bass response is achieved compared with a passive system. The P22A woofer and tweeter are powered by separate 150W RMS amplifiers and are actively crossed over at 1.8 kHz. The system's frequency-response has highs extending all the way to 35 kHz and lows down to 38 Hz (±3 dB). Tweeter gain can be adjusted 4 dB up or down with a pot on the rear panel. Also found on the back of the P22-A are contour controls (+/- 6 dB) for high- and low-shelf filters at 6 kHz and 150 Hz, respectively. The balanced analog input is on a balanced XLR connector.
Adam P22A Active Nearfield / Midfield Monitor (code 2263)
Designed for applications where deeper bass and louder volumes are needed, ideally suited for project studios as well as professional recording and broadcast facilities.
£679.99 (inc vat)