The Adam S2A Active Nearfield Monitor. Exceptional imaging and extraordinary sonic detail, primarily designed for high-end small to medium recording/monitoring environments.
The Adam S2A is a two-way active monitor utilizing unique state-of-the-art materials and technology to provide exceptional imaging and extraordinary sonic detail. The S2A was primarily designed for high-end small to medium recording/monitoring environments in a near-field application, but can be easily used in any application where precise near-field monitoring is desired. It is one of ADAM’s most ideally suited models for use in a 5.1 system. Featuring superb imaging as a result of ADAM’s proprietary A.R.T. (Accelerated Ribbon Technology) folded ribbon tweeter, the S-2A is ideally suited for project studios as well as professional recording and broadcast facilities. The tweeter is the same in all Adam monitors, starting with the P11-A near field monitor and ending with the S7-A Main Monitors. You get the same superior resolution above 2 kHz from these monitors that sets all Adam loud speakers apart from their competitors and by applying moderate equalization to the low end nearly an additional octave in bass response is achieved compared with a passive system. The S2-A woofer and tweeter are each powered by separate 150W RMS amplifiers and are actively crossed over at 1.8 kHz. The system's frequency-response has highs extending all the way to 35 kHz and lows down to 35 Hz (±3 dB). Tweeter gain can be adjusted 4 dB up or down with a pot on the panel. Also found on the panel of the S2-A are contour controls (+/- 6 dB) for high- and low-shelf filters at 6 kHz and 150 Hz, respectively. The balanced analog input is on a balanced XLRconnec tor.
The main features of the Adam S2A include:
- Exceptional imaging and extraordinary sonic detail, primarily designed for high-end small to medium recording/monitoring environments
- 2-way active bass reflex speaker
- Woofer: 186 mm / 7 inch HexaCone
- A.R.T. tweeter
- Frequency response: (+/- 3 dB): 35 Hz - 35 kHz
- Max SPL in 1m: 108dB or Greater
- Panel (front-mounted): Input/HF gain, Hi/Lo EQ
- Power: 100W (sin), 150W (rms)
- Inputs: Balanced XLR
- W x H x D: 22 x 37 x 32cm (8.6 x 14.5 x 12.5 inches)
- Weight: 13kg (28.6 lb.)
Adam S2A Active Nearfield Monitor (code 12713)
Exceptional imaging and extraordinary sonic detail, primarily designed for high-end small to medium recording/monitoring environments.
£1,095.65 (inc vat)