The Aviom MH10f Merger Hub features the same basic functionality as the MH10 Merger Hub, but replaces ports 9 and 10 with 100 Mbps Fast Ethernet SFP slots which can be outfitted with either single- or multi-mode SFP fibre optic transceivers (available separately; no SFP modules ship with the product).
Similar to a familiar Ethernet switch, but with features and performance designed specifically for networking and distributing audio, the MH10f offers unprecedented flexibility and simplicity in system design. The MH10f features ten bidirectional A-Net ports. Eight ports use EtherCon RJ45 connectors, while the remaining two feature SFP fibre slots.
In Pro64 systems running in Auto Mode, the Merger Hub creates a single network stream which is redistributed out all ten ports. This ensures that all 64 audio channels are available throughout the network, regardless of the physical location of any audio input or output. Channels can be physically located off any combination of the ten ports, even if they go through multiple Mergers.
In a Manual Mode system, the Merger Hub provides three preset signal routing configurations, allowing users to optimise the way each point merges and distributes audio channels. Each configuration preserves the bi-directionality of the system, even as inputs are separated physically off various legs of a hub.
The MH10f can also be used to provide the protection of a backup cable for main runs, as in a digital snake. The Merger Hub will also merge Aviom's Virtual Data Cable? data, allowing Pro64 devices to send and share control data effortlessly over long cable distances (up to 400ft/120m over Cat-5e between devices).
The MH10f features the security of a rear-panel four-pin XLR connector for optional backup DC power.
Single-mode or multi-mode fibre transceivers can be installed in the MH10f, depending on the needs of the application or the type of fibre cabling available. The fibre transceivers and fibre cable type (single/multi) must match in order to properly communicate.
Aviom has tested the following SFP fibre optic transceivers and found them to work with no problems:
- LAN Basics model OT-2001 (multi-mode)
- LAN Basics model SFP-3103 (single-mode)
- Avago HFBR 57EOPZ
- Finisar FTLF 1217P2BTL
- Planet MGB-LX (single-mode)
The Aviom MH10f Features:
- Distribute and merge up to 10 Pro64 A-Net streams over Cat-5e or fibre
- 8 EtherCon bidirectional Pro64 A-Net ports
- 2 100 Mbps Fast Ethernet SFP slots
- Supports single- and multi-mode SFP fibre transceivers
- Three channel-routing configurations
- Supports redundant cable paths
- Four-pin XLR Connector for optional backup DC power
Aviom MH10f Merger Hub (code 75812)
10-Port A-Net Merger Hub
£3,337.20 (inc vat)