The Dynacord CMS 1600 is a high performance, high quality mixer with integrated digital FX processor and Dual Graphic-EQ.
The Dynacord CMS 1600 is a perfect all-round solution ideally suited for feeding professional sound reinforcement or powered speaker systems. The extremely low noise and low distortion discrete microphone preamps built-in to the CMS CMS 1600 provide excellent audio quality setting new standards in the fi eld of professional mixer technology.
Specially designed Gain Potentiometers allow ergonomic fader control and additionally provide an extended control range of 60 dB. Group-switch-able +48V phantom power, Vocal Voicing filters, 3-channel tone control section with semi-parametric midrange, 4 AUX channels, PFL and MUTE, newly designed dust-proof ALPS-fader controls and the four almost identically laid out stereo channels with additional microphone inputs are only a few details of the professionally equipped inputs section.
Master and AUX 3+4 output signals are electronically balanced and output via XLR-type connectors. Relay switching effi ciently suppresses switching noise. Separate pre/post fader switching of the AUX 3+4 busses is provided within the master section.
The two feedback filters in the monitor busses, the master standby switch, tape input and the two 7-band graphic equalizers, which can optionally be used for the master or AUX 3+4 busses complete the professional feature set of the master section.
Two parallel operating and individually controllable 24-bit digital stereo effects units with 48-bit algorithms offer a total of 2 x 99 live sound-optimized presets in studio quality. Room and plate hall, echo and chorus reverb, mono/stereo delay, modulated delay effects like chorus or flanging as well as several special effects are comfortably selected via up/down keys.
Storing the preferred start-up presets for both effects units is possible in program mode. These presets are present instantly after powering on the mixer. The use of a global or two separate footswitches allows for global or individual switching the effects on and off.
A 12V/5W mixer lamp can be connected at the lamp output, which is protected against short-circuit and overload.Stable enclosures with metal protective covers ensure trouble-free transport of the mixers without need for extra fl ight-cases.
Dynacord CMS 1600 mixer main features:
- Channels (Mono + Stero) 12 + 4
- MIC Gain (Mono) 0 dB - +60 dB
- MIC Gain (Stereo) 10 dB - +60 dB
- Stereo Line Trim -10dB - +20dB
- THD+N at 1kHz, MBW=80kHz, MIC input to Main L/R output, +16 dBu, typical < 0.005%
- Frequency Response, -3dB ref. 1kHz, Any input to any Mixer output 15Hz - 55kHz
- Crosstalk, 1kHz, Fader and AUX-Send attenuation > 85 dB
- Dimensions, (WxHxD), mm 669.5 x 122 x 484.6
- Weight 11,9 kg
Dynacord CMS 1600 Powered Mixer (code 88043)
Dynacord CMS 1600 mixer
£1,200.66 (inc vat)