The Eventide PowerFactor designed to power three of your Eventide Stompboxes and four extra pedals. The Power Factor allows you to take more of your gear on stage or at a studio rehearsal, so you always be able to access your Eventide sounds.
The PowerFactor from Eventide features 10 outlets configured in 7 isolated sections and 3 powerful DC sections with 400mA each, able to power three Eventide Factor pedals. Temperature monitoring is also featured so you will never burn out when performing.
The main features of the PowerFactor includes:
- 10 outlets configured in 7 isolated sections
- Toroidal transformer with additional magnetic field shielding
- 3 powerful DC sections with 400mA each, able to power three Eventide Factor pedals
- Mounting Bracket included
- Short circuit protection of all outlets
- Advanced LED monitoring of each section
- Temperature monitoring
- 115V/230V mains voltage selector switch
- Durable steel enclosure with 2mm thick top
- Size: 6.22” x 3.86” x 1.34”, 158mm x 98mm x 34mm (excl. rubber feet)
- 13 Flex cables included:
-
2 x 4050 Flex 4 for Eventide stompboxes - 50cm (19”) w/5.5/2.5mm center positive DC-plug (green) right angle
- 1 x 4030 Flex 4 for Eventide stompboxes - 30cm (12”) w/5.5/2.5mm center positive DC-plug (green) right angle
- 3 x 1030 Flex 1 for Boss type 50cm (12”) with 5.5/2.1mm center negative DC-plug (black) right angle
- 2 x 1050 Flex 1 for Boss type 50cm (19”) with 5.5/2.1mm center negative DC-plug (black) right angle
- 1 x 2050 Flex 2 for Fulltone Octafuzz type 50cm (19”) with 5.5/2.1mm center positive DC-plug (red) right angle
- 1 x 5050 Flex 5 for EH/DOD type 50cm (19”) with 3.5mm tip positive mini-jack plug (black) right angle
- 1 x 6050 Flex 6 - 50cm (19”) with 9-volt type battery-clip (black)
- 1 x 1035 Split Flex – 30 (12”)& 50cm (19”) with 5.5/2.1mm center negative DC-plug (black) for powering two pedals from one outlet
- 1 x 1022 Stack Flex 1 - 50cm with 5.5/2.1mm center negative DC-plug (white/black) for merging two 9V to get 18V (for a maximum of 80mA)
- Outlet Specifications: Outlet 1-4: 9V DC / 100mA each, Outlet 5-6: 9 and 12V DC / 400mA, Outlet 7-8: 9 and 12V DC / 400mA, Outlet 9-10: 9 and 12V DC / 400mA
Eventide PowerFactor Power Supply (code 88744)
Regulated Power Supply For Up To 3 Eventide Stomps & 4 Additional Pedals
£239.00 (inc vat)