Fishman Pro-EQ Platinum Bass Preamp/DI for Electric and Acoustic Bass

Pro-EQ Platinum Bass Preamp/DI for Electric and Acoustic Bass description:

The Fishman PRO-EQ PLATINUM BASS Preamp/DI for Electric and Acoustic Bass. Dial in the bass sound you're looking for; loud, clear and feedback free.

The Fishman PRO-EQ Platinum Bass is suitable for electric or acoustic bass. A versatile control layout features five bands of bass-EQ, a photo-optic compressor and an innovative "depth" control for dialing in big bottom without boom. The unit's advanced circuitry is recessed into a road-rugged 12-gauge steel platform, surrounded by tough injection-molded bumpers. For a smooth, musical response and tube-like warmth Fishman use sweet sounding J-FET technology throughout. Plus, an exclusive "Voltage Doubler" gives you the extra front-end headroom needed for today's high-output active basses. Pro-audio features include an accurate and smooth sounding XLR DI with a pre/post EQ switch, plus 48-Volt phantom power operation. The XLR's special hum-killing ground lift switch does not interrupt phantom power, unlike some other bass DI's.

The main features of the Fishman PRO-EQ PLATINUM BASS include:

• Dial in the bass sound you're looking for; loud, clear and feedback free
• Nominal Input Level: -14 dBu
• Input Overload Level: +10 dBu
• Input Impedance: 10 MOhm
• Amp Out (1/4 inch jack, unbalanced): -20 dBu + 10 dBu (1 kOhm )
• Tuner/Send Out (1/4 inch jack, unbalanced): -14 dBu + 10 dBu(1 kOhm )
• XLR Out: -30 dBu to -6 dBu (600 Ohms )
• Bass: ±12 dB @ 30 Hz
• Low mid: +6dB, -12 dB @ 200 Hz
• Mid: +6dB, -12 dB @ 1.25 kHz
• Hi Mid: ± 9 dB @ 5 kHz
• Treble: ±12dB @ 10kHz
• Depth Control: 12 dB / octave low cut filter
• Range: 15 Hz (5:00) to 125 Hz (7:00)
• Compressor max gain reduction: -14 dB
• THD @ 1kHz: Less than .05%, -14dBu input level
• A weighted S/N: -89 dBu (-91 dBV)
• Noise: 27 µV (A weighted)
• Power Supply: 9V alkaline battery (estimated 80+ hours continuous use) OR Regulated FISHMAN 910 9V AC adapter - centre negative OR 48 Volt phantom power via XLR cable
• Current Draw: 4.5 mA typical