The Langevin EQP1A Discrete Mono Pultec EQ. Powerful EQ based on the Pultec design with a sweet top end, especially admired for vocal sweetening.
The Langevin EQP1A features the original Pultec circuitry however, the output stage is built using a solid state design instead of the vacuum tubes featured in the Manley Labs version. MANLEY LABORATORIES are the only authorized user of the original Western Electric passive EQ circuitry previously licensed to Pulse Techniques Inc. found in the well-known (and still sought after in the used market) antique Pultecs. EQ may be set to "flat" positions or BYPASSED entirely. The original Pultec EQ's had three transformers in the signal path whereas Manley's can be used completely transformerless. The Manley Enhanced Pultec has a vastly superior B+ power supply, with regulated and balanced heater supply. The line amp is known to be killer-sounding. All BOOST and CUT controls are continuously variable conductive plastic potentiometers for absolutely silent operation and long life. The single rack unit monoblocks occupy one- third of the space of the "antique Pultecs", an important consideration for allocation of outboard rack space. The rear mounted input switch selects 0 degrees or 180 degrees PHASE INVERT for the balanced gold pin XLR input or the transformerless unbalanced bridging input (1/4 inch jack) may be selected. Kick drum? Bring on the Pultecs! You'll soon discover the power and magic of having those individual Low Frequency BOOST and CUT controls in that LF shelf circuit... Need a little clarity or extension? Try that middle bell-shaped Boost dialing in the sharpness of the boost on the BANDWIDTH control. When you ease off the HF shelf control. You'll see. There's no substitute for a Pultec. The Langevin EQP1A unit works the same way as the Manley unit but instead has an ALL-DISCRETE make-up gain amplifier with both balanced and unbalanced inputs and outputs - all completely transformerless. It is known to have an incredibly sweet top end, particulary applicable to vocal sweetening.
The main features of the Langevin EQP1A include:
- Powerful EQ based on the Pultec design with a sweet top end, especially admired for vocal sweetening
- Same passive EQ section as the Manley version
- TRANSFORMERLESS
- PHASE REVERSE switch
- BYPASS switch
- Silent conductive plastic BOOST and CUT controls
- Sealed gold-contact Grayhill frequency select switches
- BALANCED ins and outs via Gold XLR connectors
- UNBALANCED ins and outs via 1/4 inch jacks
- Frequency Response: 0 dB 10 Hz to 60 KHz
- Less than 0.04% THD @ 1KHz
- S/N Ratio: 99 dB
- Adjustable FEEDBACK / GAIN: -2 dB to 12 dB
- Max. output (into 600 ohm load): +22 dBm
- Max. output (into 10,000 ohm load): +28 dBm
- Power Consumption (120/240 VAC): 12 watts
- Dimensions: 19 X 1 3/4 X 10 inches (occupies 1u)
- Shipping Weight: 11 lbs.
Langevin EQP1A Discrete Mono Pultec EQ (code 19939)
Powerful EQ based on the Pultec design with a sweet top end, especially admired for vocal sweetening.
£1,074.00 (inc vat)