Moog Moogerfooger MF-103 12-Stage Phaser Effects Pedal

Moogerfooger MF-103 12-Stage Phaser Effects Pedal description:

The Moog MF-103 12-Stage Phaser is a high quality effect designed by Bob Moog.

The Moog MF-103 contains an amazing-sounding 6 or 12 stage phaser circuit as well as a wide-range LFO with an adjustable sweep amount. Used with guitars, basses, keyboards, samples, or recorded tracks, the MF-103 can apply subtle tonal coloration or extremely deep phasing that spins your speakers and ears out of control.

The MF-103 12-stage phaser is a direct descendant of the original Moog modular synthesizers, yet can be used with any instrument level to line level signal.

Moog MF-103 main features include:

• RATE rotary control, which varies LFOs frequency over a 250:1 range.
• AMOUNT rotary control, which adjusts the amount by which the LFO output varies the phaser sweep.
• SWEEP rotary control, which moves the phaser frequency response over a six-octave range.
• RESONANCE rotary control, which adjusts the height and sharpness of the peaks of the phaser frequency response.
• DRIVE rotary control, which adjusts the gain of the audio input to the phaser.
• OUTPUT LEVEL rotary control, which balances the phaser signals with the bypassed signal.
• LO-HI rocker switch, which chooses between the low LFO range (0.01 Hz to 2.5 Hz) and the high LFO range (1.0 Hz to 250 Hz).
• LEVEL, a three-color LED that is used to set the DRIVE control.
• LFO, a LED that indicates the LFO rate.
• BYPASS, a two-color LED that tells whether the phaser is active or bypassed.
• ON/BYPASS, a rugged, smooth-acting stomp switch.
• AUDIO IN 1/4" phone jack - accepts any instrument-level or line-level audio signal from -16 dBm to +4 dbm. Input impedance is one megohm.
• AUDIO OUT 1/4" phone jack - -4 dBm nominal output level. +8 dBm absolute maximum output level. Output impedance is 5,000 ohms.
• AUX OUT 1/4" phone jack - -4 dBm nominal output level. +8 dBm absolute maximum output level. Output impedance is 5,000 ohms.
• RATE, AMOUNT, SWEEP, RESONANCE, all of which are stereo 1/4" jacks that accept moogerfooger EP1 (or equivalent) expression pedals, or control voltages from two-circuit or three-circuit 1/4" jacks.
• SWEEP IN - provides a means of applying an external +/- 2.5 volt control signal to the second 6-section phasing circuit, in place of the LFO. Input impedance is 50,000 ohms.
• LFO OUT 1/4" phone jack - delivers the LFO waveform (triangular wave; +/- 2.8 volts) for use by other voltage-controlled devices. Output imedance is 600 ohms.
• +9V POWER INPUT jack
• CASE: Black panel with hardwood sides -- classic analog appearance.
• DIMENSIONS: 9" x 6" x 2-1/2"
• NET WEIGHT: 2 lb.