If you don’t know what kind of acoustic environment
you are dealing with, even the best equipment can have your sound
lacking its detail and presence. That’s where the D-1500 Real
Time Analyzer comes in. With 31-bands of EQ analysis, what would once
take you hours to do can now be performed in minutes, giving your audio
output a true sonically flat frequency response.
- 31 band RTA
- Large LED display
- Signal generator (sine, white, pink)
- Test Mic Input
- Phase Correlation & VU Meters
- Linkable via MIDI or D Net System Interface
- Input Type: electronically balanced
- Input Connector: XLR
- Input Impedance: 22 kΩ at 1 kHz
- Max. input level: +22
- AIO1: +14dBu
- AIO2: +20dBu
- Output Type: electronically balanced
- Outputs Connectors: XLR
- Impedance 100 Ohms at 1 kHz
- Max. output level AIO1: +14dBu
- Max. output level AIO2: +20dBu
- Frequency Response: 10 Hz to 35 kHz (-1dB) @ 96 kHz
sampling rate
- Signal-to-noise-ratio AIO1 Noise floor (unweighted):
< -92 dBFS
(-78 dBU)
- Signal-to-noise-ratio AIO1 Noise floor (A-weighted):
< -100 dBFS
(-86 dBU)
- Signal-to-noise-ratio AIO2 Noise floor (unweighted):
< -106 dBFS
(-86 dBU)
- Signal-to-noise-ratio AIO2 Noise floor (A-weighted):
< -112 dBFS
(-92 dBU)
- THD: 0.007 % typ. @ +4 dBu, 1 kHz, unity gain
- Measurement Microphone Input Type: electronically balanced
- Measurement Microphone Input impedance: 2 kΩ
- Measurement Microphone Input Max. input level (MIC):
variable from 0 dB
to +60 dB
- Measurement Microphone Input Phantom power: +24 V
- Digital Processing Converter: 24-bit Delta-Sigma,
64/128-oversampling
- Digital Processing Sample rate AIO1 & AIO2: 32,
44.1, 48, 64,
88.2, 96 kHz
- Digital Processing Sample rate DIO1: 96 kHz
- Type: digital 31-band FFT analyzer
- Frequency range: 20 Hz to 20 kHz, 31 bands on ISO standard
frequencies
- Detectors: Peak and RMS
- Noise generator: White Noise, Pink Noise, Frequncy Tunable
Sine Wave
- Display: Type 32 Largesize 13-segment LED Frequency band,
plus LCD for
- parameter control
- Memory: Presets 100 memory locations, 99 user programable
- Midi interface: Type 5-pin. DIN jacks In/Out/Thru
- Power Supply: Mains voltage 115 V, 60 Hz, 230 V, 50 Hz
- Power consumption: 20 W typ.
- Fuse: T 630mA for 100- 120 Volt / T315mA for 220 - 240 Volt
- Mains connector: Standard IEC receptacle
- Dimensions: 19 in. (w) x 10.5 (d) x 3.5 (h), 482 mm (w) x
267 (d) x 89
(h)
- Weight: 5.1 lb.(2.31 kg)
Samson D-1500 Digital Real-Time Analyzer (code 31414)
With 31-bands of EQ analysis, what would once take you hours to do can now be performed in minutes, giving your audio output a true sonically flat frequency response.
£329.99 (inc vat)