A 1-input, 6-output portable audio distribution amplifier for routing multiple audio feeds. Ideal as a portable press bridge. Includes: XLR transformer-balanced input and outputs (each switchable for microphone or line level operation), phantom power, link jacks for connecting additional FP16A units or outboard devices, screw-driver-adjustable gain controls. Rack-mountable with A16R. Battery (three standard 9-volt alkaline) or 120/240 Vac power.
- Wide–range audio frequency response.
- Up to 90 dB gain.
- Low noise, hum and distortion.
- Protected against damage from input overload and shorted outputs; protected against RFI and mechanically protected against incorrect battery insertion.
- Transformer-coupled XLR input connector is switchable to low-impedance microphone or line level.
- Phantom power for condenser microphones available at input.
- Six isolated, transformer-coupled XLR outputs are switchable to low-impedance balanced microphone or 600-ohm balanced line level.
- Link input and output jacks permit ”ganging” of FP16s for additional outputs, or adding external equipment such as equalizers, compressors or limiters.
- Recessed input gain control with normal and overload LED indicators.
- Recessed individual output channel gain controls.
- Powered by AC (120 or 240V—internally selectable) or built-in battery pack.
- Low battery drain provides more than 15 hours operation under normal operating conditions.
- Noiseless and automatic switchover to and from battery power.
- Rugged and durable construction.
- Compact and lightweight for field use and transportation.
- Reliable operation over wide temperature and humidity extremes.
- Rack-mountable with accessory rack mount kit Noise.
Shure FP16A Portable Audio Distribution Amplifier (code 29204)
For routing multiple audio feeds. Ideal as a portable press bridge.
£602.00 (inc vat)