Developed specifically for audio-for-picture applications, the
302 mixer is the perfect tool for production companies and camera
operators wanting to take control of their audio. The 302 is stunning
for its size, flexibility, control and performance; it is the most
compact and cost-effective battery-powered professional audio mixer in
its class.
With important features to accommodate nearly any
over-the-shoulder production, the 302 interfaces with wireless
transmitters and receivers, camera audio inputs of all kinds, and
external audio recorders. Its microphone inputs share the same superb
circuitry of all Sound Devices field production tools.
Like Sound Devices' larger 442 Field Mixer, the 302 has a
complete feature-set in a compact, functional design. All controls are
accessible on its three main surfaces; no hidden controls. The
high-efficiency power circuitry runs the mixer from either three
internal AA batteries or external 5-18 VDC (not included).
- Lundahl transformer-balanced mic or line level inputs on
XLR connectors
- Continuously adjustable input trim
- Two-position high-pass filter
- Pan switches
- Limiters on inputs and outputs
- Stereo and MS linking of channel 1 and 2
- Phantom (48 V or 12 V) or "T" microphone powering selected
per channel
- Solo (PFL) channel monitoring in headphones
- Peak limiters per channel
- Tape level output on TA3 locking connectors
- Active-balanced line/tape/mic level outputs on XLR
connectors
- Stereo tape level output on TA3 connector
- Return input for monitoring
- Channel 4/5 input option
- Sunlight-viewable LED meters with proprietary software
selected ballistics
- On-board MS stereo matrix
- Push pots for setup features to keep the front panel
clutter-free
- Durable extruded aluminum chassis
- Weight less than 1 kg with batteries
- Powered by three AA batteries or external 5 - 18 VDC (not included)
Specifications:
- Frequency Response: 20 Hz - 30 kHz, +0.2, -0.5 dB, -1 dB @
5 Hz and 50 kHz typical
- Equivalent Input Noise: -126 dBu (-128 dBV) maximum (22 Hz
- 22 kHz bandwidth, flat filter, trim control fully up)
- Input Clipping Level: 0 dBu minimum (trim control fully
down)
- Line Output Clipping Level (1% THD): 20 dBu minimum, 18 dBu
minimum with 600 ohm load
- Dynamic Range: 115 dB minimum (trim fully down)
- THD + Noise: 0.007% typical (1 kHz, +4 dBu at Line out),
0.009 max (50 Hz to 20 kHz, +18 dBu at line out, fader fully up)
- Output Noise: -100 dBu (-102 dBV) maximum (22 Hz - 22 kHz
bandwidth, flat filter, master gain fully up, faders fully down)
- L/R Gain Matching: +/- 0.1 dB (Mic In to Line Out)
- Metering: 40-segment, sunlight-viewable, Selectable peak,
VU, or peak (with or without peak hold) + VU ballistics
- High-Pass Filters: Switchable 80 Hz or 160 Hz, 12 dB/oct,
silent activation
- Mic Powering (each mic selectable): none, 12 V phantom, 48
V phantom, 12 V T-power, selected per mic input
- Maximum Gain (Trim, Fader, Master, Phones RTN fully up):
XLR input mic setting to XLR output @ factory line 75dB
- Input Limiters: +18 dBu threshold, 20:1 limiting ratio, 1
mS attack time, 200 mS release time.
- Output Limiters: Affects the outputs of the mixer.
Threshold selectable from +4 dBu to +20 dBu, 1 dB steps, 20:1 limiting
ratio, 1 mS attack time, 200 mS release time
- Power supply: Internal ±16 V (bi-polar)
regulated audio rails, 2.4 - 6 V range internal batteries, isolated
(floating) external DC input jack, 5-18 V
- locking 4-pin Hirose connector, pin-4 = (+), pin-1 = (-)
- Temperature: Operating: -20°C to 60°C, 0 to
95% relative humidity; (non-condensing), storage: -40°C to
85°C
- Weight: 0.85 kg, (1.8 lbs) unpackaged with three alkaline
AA batteries (not included)
- Dimensions: 47 mm x 214 mm x 114 mm (H x W x D), 1.8" x
8.4" x 4.5"
Sound Devices 302 Compact Production Field Mixer. (code 30585)
Perfect tool for production companies and camera operators wanting to take control of their audio.
£1,466.99 (inc vat)