The Thermionic Culture Earlybird 2.2 is a two channel all valve pre-amp employing a balanced push-pull circuit
The use of this type of circuit in the Earlybird 2.2 gives very low noise and plenty of headroom with minimal distortion. These factors coupled with a switchable input impedance will mean the user can get a very natural interpretation of whatever sound the microphone is picking up, whether the mic is valve, ribbon, moving coil or FET.
The Earlybird 2.2 retains all of the features of the previous Earlybirds. Thermionic have added an extra pair of inputs to allow permanent connection to a Pullet EQ. In addition the active EQ section now has switchable frequencies on the mid and bass lift sections. The Gain controls have now been simplified and incorporated into a Function switch.
After much dedicated development work in conjunction with Brian Sowter, Thermionic have arrived at the pinnacle of audio transformer design. Both the input and output transformers have been optimised for use in our unique circuit. This results in more headroom and lower distortion especially at low frequencies.
The Earlybird 2.2 need not stand idle once the mixing process has begun. The line input facility means that the sonic haracteristics and EQ facilities of the Earlybird 2.2 can be fully utilised on any mono or stereo signals that the user feels may benefit from such enhancement. With this in mind the Pullet acts as a perfect companion for precision mid range EQ.
The Earlybird 2.2 is not only the finest mic amp available for todays recording environment but combined with its EQ and Pullet compatability, the most versatile.
Thermionic Culture Earlybird 2.2 main features:
- Input Impedance: 300 or 1200 ohms, switchable , balanced
- Output Impedance: output level control at max: 55 ohms balanced, output level control at min: 500 ohms balanced
- Maximum Gain: 62dB
- Maximum Output Level (MOL) +34dBv @1kHz, +33dBv @100Hz
- Phase Shift at 10kHz 18 degrees (5%)
- Distortion (THD), 1kHz/100Hz 0.007%/0.012%
- Frequency response +/-0.5 dB 10Hz to 38kHz
- Signal to Noise (weighted) Ch.1 115 db, Ch.2 112 dB below MOL
- Bass: +15dB @60 Hz & 100Hz
- Mid: +15dB @800Hz & 2.8kHz
- Top: +21dB @ 10 kHz
- Mid frequency: 800Hz & 2.5kHz
- Bass frequency selector: 60Hz & 100Hz
- Gain settings, mic (line in brackets) dB: dB 36( -8 ) 44( -0 ) 52( 8 ) 60(16)
- Bass Cut, Hz: 0, 40, 100, 800
- Output trim: -18 dB to 0 dB linear reverse attenuator
- Input and output connectors: 8 x 3pin XLRs, wired balanced. ( 2x mic in, 2x line in, 2x pullet in, 2x line out )
- Valve complement: 2 x 12AX7TC/ECC83, 3 x 12AU7TC/ECC82
Thermionic Culture The Earlybird 2.2 Stereo Mic/Line Preamp & EQ (code 78842)
Two channel all valve pre-amp employing a balanced push-pull circuit which provides low noise and plenty of headroom with minimal distortion. Also features switchable input impedance for mic matching
£3,420.00 (inc vat)