Your Feedback

Doepfer A-187-1 DSP Effekt Modul

(3)
Item: SYN0003498-000
  • SOLD OUT!
Doepfer A-187-1 DSP Effekt Modul Product Image
Enable Social Media
The Doepfer A-187-1 Eurorack DSP Effects Module is a Eurorack DSP effects module, with 4 voltage controlled parameters, a...  All product info

This product is no longer available!
We are happy to help you!

Activate social media for sharing. Data will only be sent via social networks with your consent.

  • INTERACTIVE
    CATALOGUE
  • MORE THAN 3.000
    PRODUCT VIDEOS
  • EASY
    RETURN
  • 3 YEARS
    WARRANTY
  • 55.000 PRODUCTS
    READY TO SHIP

Product information - DOEPFER A-187-1 Voltage Controlled DSP Effects

Digital effects module

The Doepfer A-187-1 Eurorack DSP Effects Module is a Eurorack DSP effects module, with 4 voltage controlled parameters, and 16-position rotary effects selector switch. Module A-187-1 is a DSP based effects module. Four parameters of the selected digital effect are voltage controlled. The main effect (e.g. reverb, delay, pitch-shifter, equalizer) is selected by the two small buttons effect up/down. The upper row of the display shows the effect that is currently selected. In the lower row the four parameters are shown as well as a small bar left from the abbreviation that displays the current parameter value. Each parameter can be adjusted manually (upper potentiometer row) and modified by external control voltages (lower row of the potentiometers and upper row of the sockets). The lower row of the sockets contains the two audio inputs and outputs.

Another button (bypass) is used to turn the effect on/off. When bypass is chosen the upper line of the display shows in turn "BYPASS" and the name of the pre-selected effect. In the bypass mode another effect can be pre-selected and called-up by pressing the bypass button again. Even the effect parameters can be adjusted. But they become effective not before the bypass mode is left. The module is equipped with two audio inputs and two audio outputs because the DSP board features stereo audio processing. The audio inputs can process usual A-100 signal levels without clipping/distortion. For higher levels external attenuators (e.g.. A-183-1) or VCAs may be used. A readymade DSP board is used inside the A-187-1 module. Consequently only these effects and parameters are available that is supported by the DSP module. Some parameters can be changed only in steps or with audible artefacts. The DSP board has 20 Bit DA and AD converter with 32 kHz sample rate available. The inter-sound processing uses 24 Bit.

The main features of the Doepfer A-187-1 Eurorack DSP Effects Module include:

  • Width: 18HP / 91.3mm
  • Depth: 60mm
  • Current: 200mA
  • Reverb PreDelay ( around 0 .. 50 ms), Reverb time ( about 40 ms up to 500 ms)  / Chorus/Flanging (1 ms to 41 ms) ,  Delay ( 1 ms .. 165 ms) - all in 128 steps
  • Chorus/Flanging Rate  about 0,025 Hz till around 12,5 Hz  in 128 steps
  • Pitch Shifter: -12 half tones.... + 12 half tone - in half tone steps
  • All equalizer parameters  in steps of 1 dB  from about -24dB to about +12dB

Features:

  • Manufacturer: Doepfer
  • TE / HP: 18
  • Depth (mm): 60
  • + 12 V (mA): 200
  • - 12 V (mA): 20
  • Reverb: Yes
  • Delay: Yes
  • Modulation: Yes
  • Equalizer: Yes
  • Distortion: Yes
Doepfer A-187-1 DSP Effekt Modul Product ImageDoepfer A-187-1 DSP Effekt Modul
N/A
£ 392.00
£ 206.00
£ 208.00
£ 254.00
£ 125.00

Compare with similar products

The Largest Music Store in Europe

Music Store professional in Cologne

MusicStore-MusicStoreShop:/department-footer/MusicStore_Aussen_Neu_schmaler.jpg

DV247 Music Store in London

DV 247 Store in London Romford

Video: Synthesizer

Video: Piano Center

Video: Keyboards