Erica Synths Pico System III Desktop

Function overview:

• Mini sequencer with 2, 3 or 4 steps
  
• VCO 1: analog, with triangle and rectangle with PWM
  
•  VCO Ctrl: Oscillator controller with extra VCA
  
• VCO2: analog, with triangle and variable waveform
  
• Mix1: open mixer with three inputs
  
• Mod: Sine and rectangular LFO, Sample & Hold, Random and Noise Generator
  
• VC-EG 1+2: loopable attack/decay envelopes with CV control for the phases
  
• LPG 1+2: Filter/VCA combination
  
• BBD: Delay with up to 600 ms delay time
  
• Mix2: open mixer with three inputs
  
• Mix3: open mixer with two inputs, adds up Mix2 and is main output
  

Memory card system

Of the 31 inputs and 20 outputs of the patch panel, 44 inputs and outputs can be found on the Voice Card. At the rear, these connections to the card slot are predefined and cannot be changed; switch positions and controller positions are not detected. Although some functions are dual, Erica has provided synths for the "storable" connections. Five Voice Cards with Factory Presets and five additional DIY Voice Cards are included with the Pico System III. Of course, the patch field can be used in addition or instead of the cards.
The DIY cards are "empty" and require precise soldering skills and care from the user. Otherwise the instrument or voice card may malfunction and/or be damaged. For more detailed information, please refer to the detailed instruction manual.