Your Feedback

Laserworld CS-4000RGB FX

Item: LIG0018097-000

New!

Compare list
Recommend

Information on the disposal of old devices

4 Watt pure diode RGB laser system, 3 built-in grating effects, approx. 130 graphics, controllable via ILDA or DMX All product info

Product returns for N/A

£ 897.00

About a product

incl. VAT, incl. Shipping Costs

or cheap with financing

on demand

We are happy to help you!

PA & Lighting
sales@dv247.com
+44 17 0877 1910

INTERACTIVE
CATALOGUE
MORE THAN 3.000
PRODUCT VIDEOS
EASY
RETURN
3 YEARS
WARRANTY
55.000 PRODUCTS
READY TO SHIP

Product information - Laserworld CS-4000RGB FX

Features

4 Watt pure diode RGB laser system
3 built-in grating effects: Line, Burst and Radial
DMX controllable, master-slave operation possible
computer controllable via ILDA
Plug & Play: music and automatic mode
Display of standard graphics
Scanner 30 kpps@4°
full color laser with analog modulation
adjustable beam aperture at the exit window
360° mounting bracket

The Laserworld CS-4000RGB FX is an analog modulated, full color RGB diode laser system with a total output power of up to 4'000 mW and a guaranteed output power of 3'500 mW. The red laser source has an output power of 850 mW / 635 nm, the green of 850 mW / 520 nm and the royal blue laser source has an output power of 1'800 mW / 450 nm. The diode laser sources sorgen for strong laser beams. The projector has good beam specifications with a beam diameter of approximately 3 mm and a beam divergence of 1.4 mrad. The galvo system has a scanning speed of up to 30 kpps@4°.

About 130 graphics (including levels, tunnels, grids, waves, etc.) can be projected in different colors and at different speeds via DMX in automatic mode as well as in music mode. If the automatic mode is active, the pre-programmed patterns run without further intervention, and in music mode the laser system projects in tune with the sound. The microphone sensitivity can be adjusted via the integrated Display, the projection size via two knobs on the back of the device.

In addition to the modes mentioned above, this laser projector also offers a master-slave mode. Show lasers of the same series (slave projectors) connected via DMX cable to a main projector (master projector) project the same patterns as the master projector.

Together with the approximately 130 graphics stored on the laser (including planes, tunnels, grids, waves, etc.), these effects offer a wide range of combination possibilities for impressively illuminating medium to large locations. The grating effects make the projected patterns appear as if they are being output from many projectors simultaneously. The resulting expansion allows for effects that could not be achieved in any other way.

In addition, the laser is computer controllable via a professional ILDA interface. So own or pre-programmed laser shows, logos, texts or own graphics and animations can be shown in combination with a laser control software (e.g. Showeditor or Showcontroller).

There are safety features such as a key switch, interlock and on-off switch. The Laserworld CS-4000RGB FX show laser projector comes with a compact housing that is lightweight and has a sturdy 360° bracket mount. The bracket allows for various mounting positions: Both a hanging and a standing installation is possible - ideal for mobile DJs and temporary laser shows, but also for permanent installations on a truss or on the ceiling.

The Laserworld CS-4000RGB FX is ideal for semi-professional applications and is perfect for medium to large clubs and discotheques as well as for mobile DJs, private use and in any other party location.