The InLED WT20.swa is a new model in the InLED series from LITECRAFT. This version boasts a white LED array. The InLED WT20.swa is the official successor to the well-known Studio PAR WT9. Thanks to its new Y yoke, the device is easily mounted without additional accessories either on a truss or standing freely on the floor.
The device is based on a high-powered LED chip with the light colours Warm White, Cold White and Amber. Through the combination of the three luminous colours, a wide spectrum of shades of white can be achieved, these ranging from daylight to artificial light. The colour temperature is continuously adjustable from around 2,300 to 5,700 kelvin.
The device is controlled via DMX using one, two, three or six DMX channels. For use in trade fair and shop fitting, the device is also armed with 76 white light macros that can be selected via DMX or, in the event that no DMX cabling is available, by hand. Any parameter set using the liquid-crystal display is automatically stored and reloaded automatically next time the device is switched on. This allows the InLED WT20.swa to be used also as a simple plug 'n' play solution.
The InLED WT20.swa comes in the elegant, compact and robust housing that was specially designed for all LITECRAFT's new indoor and outdoor products. The output—twice that of its predecessor—is comparable with that of a CDM luminaire in the 150-watt class. The InLED WT20.swa employs a total of 18 high-quality brand LEDs of the WT20 generation that provide for homogeneous illumination by means of original KHATOD lenses.
For swift and reliable rigging, the InLED WT20.swa is equipped with original NEUTRIK XLR and PowerCon inputs and outputs that facilitate the daisy-chaining of multiple devices. For software updates, an RJ45 EtherCon socket is provided on the rear panel.