Ready to ship
55,000 Products
UK Team in London
Mega Store in Cologne
Money Back
30 Day Return Policy
You have placed the following items into your shopping cart
Ready to ship
55,000 Products
UK Team in London
Mega Store in Cologne
Money Back
30 Day Return Policy
The CX10N251 is a lightweight coaxial driver with excellent linearity and high efficiency. The CX10N251 radiates a coherent single spherical wave front with perfect dispersion control. The design is powered from a large sized single neodymium ring magnet that provides an extremely high flux density and BL factor. The new hyper-vented aluminium basket and magnetic assembly design provide an excellent heat dissipation and lower power compression. Special air-forced ventilations are provided for voice coil, magnet assembly and basket. A 2,5" voice coil combined a strength fibreglass former and aluminium wire drives the mid-bass cone with high efficiency and a good extension. The 1,7" dome compression driver, loaded to a 60° conical waveguide, provides a clear vocal output and a perfect high frequency extension.
Features 600 Watt continuous program power handling Mid-Bass 2.5-inch , fibreglass outside, aluminum voice coil 99 dB Sensitivity 65 Hz - 3.5 kHz Frequency range Dual-forced air ventilation for minimum power compression M -roll surround and exponential cone geometry Demodulation ring 100 Watt Continuous program power handling HF 1.75-inch Diaphragm, 1.0-inch Exit Throat Frequency range: 1200Hz - 20kHz 2-slot, optimised geometry phase plug Polyester diaphragm Aluminum rear cover dissipation design
CX10N251 Driver Nominal Diameter: 25.4 / 1.0 mm/inch Rated Impedance: 8 Ohm Program Power: 100 W Power Handling Capacity: 50 W Sensitivity 1 W, 1 m: 109 dB Frequency Range: 1200 - 20000 Hz Minimun Impedance: 6.5 Ohm Voice Coil Diameter: 44.4/1.75 mm/inch Voice Coil Material: Edgewound Aluminum Number of layers: 1 - Outside Diaphragm Material: Polyimide Diaphragm Design: Dome Suspension Material: Polyimide Suspension design: Flat BL factor: 7.5 T · m Flux density: 1.9 T Phase plug design: 2 slot Phase plug material: Composite Magentics: Neodymium
CX10N251 Horn Throat Diameter: 25.4 / 1.0 Nominal coverage (-6dB): 60°° Cut-off Frequency: 1800 Material: Structural Polyurethane
CX10N251 Woofer Nominal Diameter: 250 / 10 mm/inch Rated Impedance: 8 Ohm Program Power: 600 W Power Handling Capacity: 300 W Sensitivity: 99 dB Frequency Range: 65 - 3500 Hz Effective Piston Diameter: 210 / 8.27 mm/inch Max Excursion Before Damage (peak to peak): 30 / 1.18 mm/inch Minimun Impedance: 6.4 Ohm Voice Coil Diameter: 64 / 2.51 mm/inch Voice Coil Material: Aluminum Voice Coil Winding Depth: 14 / 0.55 mm/inch Number of layers: 1 Top Plate Thickness: 8 / 0.31 mm/inch Cone Material: No pressed pulp Cone Design: Curved Surround Material: Polycotton Surround Design: M - roll
Thiele/Small Parameters Resonance frequency: Fs - 72 Hz DC resistance: Re - 5.2 Ohm Mechanical Factor: Qms - 4.5 Electircal Factor: Qes - 0.25 Total Factor: Qts - 0.23 BL Factor: Bl - 17.5 T · m Effective Moving Mass: Mms - 28 g Equivalent Cas air load: Vas - 25 liters Effective piston area: Sd - 0.035 m² Max. linear excursion ( mathematical): Xmax - 4.8 mm Voice - coil inductance @ 1 kHz: Le1K - 1.2 mH Half-space efficiency: Eff - 4.7%
Mounting Information Overall Diameter: 260 / 10.24 mm/inch Bolt Circle Diameter: 241 - 246 / 9.50 - 9.60 mm/inch Bolt Hole Diameter: 5.5 / 0.22 mm/inch Front Mount Baffle Cut-out: 234 / 9.21 mm/inch Rear Mount Baffle Cut-out: 234 / 9.21 mm/inch Depth: 126 / 4.96 mm/inch Volume occupied by the driver: 2.1 / 0.07 liters/ft³ Net Weight: 3.1 / 6.83 kg/lbs
RCF CX10N251, coaxial transducer 10"/1", 300W/50W @ 8/8 Ohm
