SPL Electronics Pro-Fi Phonitor se black

Item: REC0015046-000
Enable Social Media
High end headphone amplifier, VOLTAiR technology, AMP CTR connection, phonitor matrix with 2 presets.   All product info

£ 839.00
incl. VAT, incl. Shipping Costs
or cheap with financing
available soon, estimated to be in stock: Feb 9, 2023
We are happy to help you!
Our team
Pro Audio & PC
+44 17 0877 1966
+44 17 0877 1901

Activate social media for sharing. Data will only be sent via social networks with your consent.

Product information - SPL Phonitor se

SPL Phonitor se Overview:

  • Premium class headphone amplifier for demanding listeners
  • VOLTAiR technology with 120V operating voltage
  • optimized performance compared to Phonitor e
  • 2x 5W output power, also suitable for high-impedance headphones, magnetostats and electrostats
  • phonitor matrix with 2 presets
  • RK27 "Big Blue" potentiometer from Alps
  • analog inputs: Cinch L/R
  • > 114,2dB signal to noise ratio @ 1kHz, full scale
  • DAC card with 768kHz/32bit sample rate optionally available

The SPL Phonitor se is the most affordable model of the proven Phonitor headphone amplifier. It uses the same amplifier circuitry, a Phonitor matrix and can also be equipped with a DAC card with PCM, S/PDIF and ADAT inputs.

High-performance electronics

SPL's proprietary VOLTAiR technology uses special discrete operational amplifiers that can tolerate an operating voltage of 120V. This is approximately twice the voltage that can be expected from standard opamps. Due to the high operating voltage, signal-to-noise ratio and total distortion can be improved by about 4.5 times (13dB) and are on par with the values measured on an industrial quality signal generator.

Powerful output level

The Phonitor se's power amplifier delivers up to 5W of output power on each channel at the headphone output. This allows you to drive not only very high-impedance Kopfhörer (>600Ohm), but also the extremely sophisticated models with magnetostatic or electrostatic transducers. This means that you can not only experience your music at any volume on any headphone model, but you can also turn down the volume control and achieve even lower noise levels.

Natural listening with headphones

Like the other models in the Phonitor range, the Phonitor se features the Phonitor Matrix. This purely analogue circuit simulates the surround sound of a pair of speakers set up in a perfect stereo triangle. Depending on the setting, corresponding portions of the opposite channel are frequency-corrected and mixed into the left and right channels, thus faithfully simulating the natural crosstalk between the left and right ears when listening in a real room. You have to hear it, the effect is truly amazing! With the Phonitor se, this matrix is available to you in the form of 2 presets.

Ready for digital media

With the optional digital-to-analog converter DAC768xs, the SPL Phonitor se can be extended to the common digital formats S/PDIF and ADAT and additionally allows the connection of PC, Mac and Apple devices via USB. The converter card has been redesigned especially for the Phonitor se and resolves PCM audio up to 768kHz at 32bit dynamic depth. Direct Stream Digital is also recognized and supported with a resolution of DSD4 respectively DSD256. This means that even the finest sound details are reproduced accurately - more accurately than in many a mastering studio!


  • Manufacturer: SPL Electronics
  • Headphone inputs: 1
  • DAC: No
  • Stereo input: RCA
  • Width (mm): 278
  • Depth (mm): 300
  • Height (mm): 57
SPL Electronics Pro-Fi Phonitor se black Product ImageSPL Electronics Pro-Fi Phonitor se black
£ 839.00

Department Information - Pro Audio

Music Store professional in Cologne


DV247 Music Store in London

DV 247 Store in London Romford

Video: Pro Audio

Recording Center


Pro Audio - Picture Gallery