Your Feedback

axxent PS-101S Netzteil für bis zu 15 Beltpacks

Item: PAH0022775-000
  • SOLD OUT!
axxent PS-101S Netzteil für bis zu 15 Beltpacks Product Image
Enable Social Media
Power supply for BP100 and CP-100, for charging up to 15 beltpacks  All product info

This product is no longer available!
We are happy to help you!

Activate social media for sharing. Data will only be sent via social networks with your consent.

  • INTERACTIVE
    CATALOGUE
  • MORE THAN 3.000
    PRODUCT VIDEOS
  • EASY
    RETURN
  • 3 YEARS
    WARRANTY
  • 55.000 PRODUCTS
    READY TO SHIP

Product information - Axxent PS-101S Power Adapter for BP100 and CP-100

Power supply unit

Axxent PS-101S power supply for BP100 and CP-100

Technical data

  • Power supply: 100-240 V AC, 50/60 Hz, 31 VA
  • Input current: 0.7 A at 115 V, 0.4 A at 230 V alternating voltage
  • Input connector: IEC C6 (called Mickey Mouse or cloverleaf plug)
  • Output voltage: 24 V DC with low ripple
  • Output current: 0.7 A continuous and 1.3 A peak
  • Output connector: 2x3-pin XLR male. Pin 1 = 0 V, ground; pin 2 = +24 V voltage; pin 3 = audio and signaling. Termination impedance is 560 ohms.

With the Axxent PS-101S power supply, up to 15 beltpacks or other components can be supplied with power via microphone cables, e.g. the axxent BP-100, but also the operation of signal lights or other smaller intercom components, such as e.g. the axxent CP-100S speaker station. And this without a main station.

Normally, intercom components such as beltpacks, loudspeaker stations, signal lamps are operated via a main station and supplied with the necessary operating voltage via the same connecting cable.
These main stations usually have a design in 19" technology for mounting in 19" racks. Since the use of digital audio mixing consoles has mostly prevailed in recent years, and thus most 19" sideracks with dynamic processors are no longer required, 19" additional devices are often no longer desired. Therefore, we have developed a power supply unit that supplies a whole number of intercom components with the required supply voltage without the need for a main station.

The PS101 power supply unit has sturdy steel housing with rubber feet and should therefore provide decades of good service. The useful continuous current is 0.7 A. Internally, a switching power supply with low residual ripple and low interference radiation is used, which is suitable for operation between 100 V and 240 W AC voltage. The mains connection is made via an included protective contact cable with the new standard, space-saving IEC 320-C5 IEC connector (Mickey Mouse plug).



Features:

  • Manufacturer: Axxent
axxent PS-101S Netzteil für bis zu 15 Beltpacks Product Imageaxxent PS-101S Netzteil für bis zu 15 Beltpacks
£ 179.00

Department Information - PA

Music Store professional in Cologne

MusicStore-MusicStoreShop:/department-footer/MusicStore_Aussen_Neu_schmaler.jpg

DV247 Music Store in London

DV 247 Store in London Romford

Video: PA

The PA Store

PA & Stage Technology - Picture Gallery