sE electronics Voodoo VR2 Active Ribbon Microphone

Item: REC0008065-000
Enable Social Media
sE Electronics Voodoo VR2 Active Ribbon: For many decades Ribbon mics have been used by engineers for their extremel...  All product info

£ 422.00
incl. VAT, incl. Shipping Costs
or cheap with financing
available soon, estimated to be in stock: Dec 19, 2022
We are happy to help you!
Our team
Pro Audio & PC
+44 17 0877 1966
+44 17 0877 1901

Activate social media for sharing. Data will only be sent via social networks with your consent.

Product information - sE Electronic VR2 - Sommerdeal!

sE Electronics Voodoo VR2 Active Ribbon: For many decades Ribbon mics have been used by engineers for their extremely natural sounding reproduction of source material. The nature of their performance differs greatly from condenser mics, which by comparison sound very ‘up front’ and lack the harmonic depth of a good ribbon. Even at the high end of the market, the customary roll-off of almost all the top end frequencies (7-10kHz) has always been a major drawback, which is why condenser mics dominate the recording market.

The traditional appeal of the condenser then has been the assumption of consistent frequency response from 20Hz to 20KHz. The pay-off of course is that these mics require a certain degree of circuit board magic to achieve this, since the taught-ness of the diaphragm – compared with relatively slack ribbon membranes – means condensers tend to be more ‘coloured’ in their sound. Traditionally engineers using ribbons, however expensive, have had to accept their significant limitations or have had to augment the recording with a condenser mic to capture the high frequencies, absent from the ribbon output.

Such compromises have meant that ribbons have never been very widely accepted or used as a first choice for recording. This is starting change with the introduction of the RNR1 and now the Voodoo range of ribbon microphones. The Voodoo ribbon mic, like its big brother the RNR1 allows high frequencies to be captured using a special patented design. The standard performance of the VR2 is a staggering 20Hz to 20KHz – two to three times the frequency range of even the best ribbon mics on the market.

sE Electronics Voodoo VR2 Features:

  • Active Ribbon Microphone
  • Near-linear Frequency Response: 20Hz to 20kHz
  • Open Natural Sound


  • Manufacturer: SE electronics
  • Microphone type: Ribbon
  • Polar Pattern: Eight
  • Frequency range: 20 - 18.000Hz
  • Sensitivity (mV/Pa @ 1kHz): 14.1
  • Input: XLR 3 Pole
  • Width (mm): 19.5
  • Depth (mm): 33
  • Height (mm): 187
  • Weight (kg): 360
  • Mono or stereo: Mono
  • Power supply: 48V
  • incl. Accessories: Clamp, shock-mount, case
  • Application Area: Instrument
sE electronics Voodoo VR2 Active Ribbon Microphone Product ImagesE electronics Voodoo VR2 Active Ribbon Microphone
£ 422.00
£ 669.00
£ 654.00
£ 527.00
£ 398.00

Compare with similar products

Department Information - Pro Audio

Music Store professional in Cologne


DV247 Music Store in London

DV 247 Store in London Romford

Video: Pro Audio

Recording Center


Pro Audio - Picture Gallery